General Contracting Company
VCG Construction is a general contracting company. Every renovation, from kitchen install to window replacement, and everything in between, is executed with the utmost professionalism.
VCG’s unique combination of craftsmanship with a knack for design will create spaces in your home that are relevant and timeless. Every renovation uses the best materials available and are expertly installed to last a lifetime, leaving you with a home that not only has form and function, but also fashionable flair.
WHY CHOOSE US
Creative Gorgeous Design
Avoid Remodelling Remorse by Brainstorming with Us
Any room you remodel should be a work of art that makes you feel happy whenever you set foot in it. Your friends and family should immediately say, “Wow!” (and possibly turn green with envy.) The intricate details of your rooms should each have a story that will be a joy for you to tell and for them to share. You don’t want to complete your remodel and feel the disappointment of, “I wish I had done that.”
When you work with us, you’ll have instant access to hundreds of creative design ideas and our expert designers who specialize in luxury home remodeling. Whether you are on the Main Line, Center City Philadelphia, or the New Jersey Shore, We are the general contracting company that will help you fall in love with your home for the second time.
Specific, Accurate Budget
Avoid Bait and Switch Budgets
You’ve heard the horror stories. Half way into a remodel, the general contracting company “finds something” that will increase the project cost by 40%. After weeks of time and thousands of dollars, the poor homeowner is now held hostage to a contractor that failed to create an accurate bid – or possibly intentionally bid low to get the job with the intent of “finding” a problem later. That’s wrong.
Most general contracting companies give a rough estimate with a few lines of detail. We spend dozens of hours creating an extremely detailed Bid Proposal so you don’t experience any surprises. In fact, as you’ll discover in the “Guarantees” section below, we promise that the final project cost will be within 10% of your budget.
Highest Quality Materials
Beware Quality Cutting Shortcuts that Can Cost You More
Do you prefer Gourmet Cuisine or McDonalds? Ingredients matter and when it comes to the remodeling of your home, using anything but high quality materials can be a disaster and an embarrassment. The pieces of our gorgeous home renovations – especially kitchen redesigns – are intricately connected. If one fails over time or doesn’t fit, days or weeks of work may need to be redone. Moreover, the plethora of home decoration television shows means that your family, friends, and neighbors know quality materials from cabinets to countertops to fixtures so the cheap Home Depot brand won’t do for you.
Like Michelin trained chefs, we’re the general contracting company that only uses the highest quality materials and brands in our projects. We have a special relationship with suppliers of brands like Medallian, Kraftsmaid, and Anderson Windows. They’ll tip us off on everything from special batches of granite or stones with intricate patterns and special discounts on the hottest fixtures. Don’t you deserve the best?
Meticulous Craftsmanship
There are few things worse than spending hundreds of hours and thousands of dollars only to feel like the remodeling work in your home has flaws. Crooked tile lines. Countertops slightly offset. Cabinet doors that don’t close with precision. And by then it’s too late to redo the work. You are stuck with it and if it’s a big error, possibly haunted by it and the fact that other people will notice.
Craftsmanship. That’s not usually a word associated with a “general contracting company,” But, we approach our work as “artists” rather than “mechanics.” Not only is this a reason we don’t say things like, “Well, we won’t know until we get into it,” but it’s the reason that everything we do from architectural redesigns of entire homes to the tiniest drop of painting is completed with pinpoint accuracy. You know what “meticulous craftsmanship” looks like. Let us make sure your home is remodeled to your standard of perfection.
Guarantees
There are few guarantees in life and most of those made by businesses come with mind numbing paragraphs of small print written to undercut the guarantee. General contracting companies are notorious for bid and material bait and switch tactics and things like showing up late, not supervising subcontractors, and even hiring drug addicts. They may work hard to get money for their next “fix” but do you really want them in your home?
We guarantee the following:
- Brainstorming dozens of creative ideas with your final say on every detail of your project.
- Final cost at or UNDER the hard bid.
- Highest quality materials at the best price possible.
- Meticulous work reviewed daily for quality control.
- Hire only employees and subcontractors who can communicate clearly.
- Exceed your expectation of a general contracting company.
“Vince is a First Class Human Being. He has a passion for life and people and it shows in his work. He has high standards for him self and his business. Vince is detailed oriented and has a great mix of street smarts and formal business education. I highly recommend Vince as a friend, builder, and business partner.”
Hi
How are you? I would like to get your professional opinion. I want to buy cordless inflator im using to system Milwaukee and Dewalt. I can not pick up which one is better since im using both platforms i do not know. Thank you for your help
Hey Vince,
Just seen your tool review and was shocked to find out you were a Philly based guy. Very good to hear a Phillly Guy is doing tool reviews, I assume you are a a South Philly Based outfit?
Born and raised cuz, Thanks!!
Hi Vincent,
I enjoy your tool reviews on Youtube & I have a question that could possibly lead to a new review for you. I couldn’t see how to contact you via your Youtube videos.
I am a Dewalt & Ryobi owner and I will someday be purchasing a cordless sds dewalt multi drill, but I also have a need for a cordless impact wrench… My question is this, do they make an adapter that will allow me to use my sds hammer drill as an impact wrench & save a few hundred dollars by not having to purchase a dewalt impact wrench?
Thanks for your time
Hi Vince,
A fellow contractor here albeit I’m in the I T service and support field. Thank you for being a positive leader by example in your vids. Safety glasses and gloves are paramount in the work you do, also I like that you avoid using foul language in your vids.
One mature guy to another may I say this I get the shaped beard, it’s a cool factor thing for you I guess, however the gray hairs do not do you your awesome looks any favors. You should discretely color your beard so the gray is not so predominate, respectfully. The grays age you more than I sure your true age is. A couple of vids below to give you an informed perspective.
Have a great day,
Respectfully
VID1. https://youtu.be/PqrZWd_CQIE
VID2. https://youtu.be/mRjC744y4Ys
I don’t think Vince is worried about whether or not some old guy on.a ladder is attracted to him. I bet the misses likes his grey in his beard.
hahhahaha you got that right!!
I have watched a few of your videos on youtube. Most of the construction workers I have been around all my life are not the brightest bulbs on the tree. But, you Vincent (and your production team) are very smart guys! Thanks for sharing your knowledge.
Steve Camp
Elk River, MN
Hey VCG, I found you on YouTube. I’ve laughed a lot, and learned a lot! Please help a power tool “newbie”. My project is repairing my wood privacy fence. The fence is 8 ft. tall, has 23 poles, and 115 pole brackets. This translates into nearly 700 lag bolts! I need your professional advice on which Milwaukee power tool I should choose for this task. There are so many Milwaukee Models to consider. I don’t know how/which to choose. I subscribed to the channel, watched your VIDs and I think I need an M18 Impact driver. I have a few Dewalt tools, but I have learned that Milwaukee tools are better. I want the best one. But what model is the best one? Since this is Labor Day week, I was hoping to pick up a new tool from International Tools (?), or watch for special sale at my local HD store. I’m an old guy and Army Veteran and any help would be greatly appreciated. Thank you very much!
Allhelpappreciated,
Bobby
Frisco, Texas, U.S.A.
213-926-4837 | Cell
Hey VCG, I found you on YouTube. I’ve laughed a lot, and learned a lot! Please help a power tool “newbie”. My project is repairing my wood privacy fence. The fence is 8 ft. tall, has 23 poles, and 115 pole brackets. This translates into nearly 700 lag bolts! I need your professional advice on which Milwaukee power tool I should choose for this task. There are so many Milwaukee Models to consider. I don’t know how/which to choose. I subscribed to the channel, watched your VIDs and I think I need an M18 Impact driver. I have a few Dewalt tools, but I have learned that Milwaukee tools are better. I want the best one. But what model is the best one? Since this is Labor Day week, I was hoping to pick up a new tool from International Tools (?), or watch for special sale at my local HD store. I’m an old guy and Army Veteran and any help would be greatly appreciated. Thank you very much!
Allhelpappreciated,
Bobby
Hi,
My name is Max Ilinykh and I am a senior in high school who is going to be going to trade school to study carpentry. I was just wondering if you guys would be looking to hire an apprentice after I graduate or if I could get into touch with Vince to discuss how to navigate the world of the trades.
Thanks
Your Tube channel is great!! You guys are awesome. Thanks for all your hard work!! Looking forward to getting VCG merchandise.
Keep up the great work!
Hi there,
Hope you are doing well.
This message is from Brink Estimating,LLC to let you know about our services. We are UK based cost estimating & quantity take-off firm, having extensive experience of cost estimation and deal with both residential and commercial projects for all types of contractors.
We are providing this service at a price of 50% less than market.
Do send over the plans/blueprints/drawings if you need any job to be quoted.
Thank you.
On one of your you tube videos you mentioned that November 1 Milwaukee was going to have a sale I live in Washington state and I have not be able to find any kind of Black Friday sale. Iam looking for Milwaukee 22 in. PACKOUT Modular Tool Box Storage System
Hi my name is Santiago I Looking for job framing acoustic ceilings frp Painting, texturing, tape & bed, sheet rock repair (paint and texture matching)
• Carpentry: trim, door jambs, installing doors, etc.
• Electrical: replacing ceiling fans, light fixtures, wall and switch plates, etc.
• Plumbing: replacing faucets, toilets, fixing leaks, water Gutters
• Fencing
• Flooring/Tile
• Any general home repairs I have liability insurance 9012183180 thx
Vince –
FYI
Acme tool packout promo 60packout will get you 3 piece set for $199 less $60 total out the door $139. No additional tax.
I just bought it. I could not past it up…. my wife is going to kill me.
Richard Gray
Hello, sir.
My name is Leona. I’m working for GemRed, a measuring tool manufacturing company. The tools mainly used for woodworking, construction, home decoration etc. This is our website http://www.gemred.com and Amazon store http://www.amazon.com/shops/gemred The products now ranking the front in category protractor and angle gauge.
We would like to invite some reviewers for our products to share their opinions with more people through social media. Do you have interests in trying some GemRed tools? We’ll provide free products for you. Or if you have any other suggestion, please feel free to tell me.
Best regards
Leona
Hey Vince,
Wanted to let you know and the very cool gang of a Milwaukee deal. If you go to the Home Depot website they have the Milwaukee M18 Fuel 1-9/16 in. SDS-Max Rotary Hammer (Tool-Only) for 288.39. It should normally be 400 something I believe but it rings up as 288 online order only. Mine is on its way now but just thought I would drop the info. Maybe they will price match at the depot not sure. Thanks for all the good info on youtube! enjoy all the videos!
Hi, my name is William. Let me start off by saying we have been under construction SEP 2018. In 2018 we had a big storm with came through our roof. and also in OCT 2019. In turn we filed insurance as do many, well that was the start of our dilemma. Working with insurance local contractors who i have to say all work together and “talk”. Now everyone knows about the Clark house, so everyone wants there hands in it, I have no clue why. As you can tell im trying to make this short. So here it is my family is living in our car, insurance no paying for hotel after only 2 months, the contractors went out of business and pulled there workers and here we are house 50% somewhat done and whats left of the money the insurance did not give us. (code upgrades) they said…….I wish i had Very Cool Guys doing my house.
Hello
I wasnt sure where to send this email but I love Vince’s YouTube videos. They’re very informative and entertaining ( which is just as important)
I wanted to ask how he gets access to or how he finds out about these tool shows. I’ve been a contractor for 15 years and always love checking out new products.
Any information would be greatly appreciated.
Thanks so much and keep the videos coming!
Not looking for a remodel but thought you may find this deal interesting at Home Depot.com they are selling the M12 12-Volt Lithium-Ion Cordless 3/8 in. Crown Stapler with 4.0 Ah M12 Battery for 179.00 but the sale of the day is for a M12 12-Volt Lithium-Ion Cordless 3/8 in. Crown Stapler Kit with One 4.0 Ah Battery, Not sure the deal is worth putting out there but its still a free bag and they basically give you 20 bucks.
Hi Vince, I wasn’t sure how to let you know about this deal. So here it is…..
Rigid trim router with two batts, batt charger, and carry case, $158.00+ online. I purchased it this am. Just wanted you and your fans to know, thanks
Johnny (JRG).
Hi Vince, I wasn’t sure how to let you know about this deal. So here it is…..
Rigid trim router with two batts, batt charger, and carry case, $158.00+ online. I purchased it this am. Just wanted you and your fans to know, thanks
Purchased from HD.
Johnny (JRG).
Hello Vince,
My name is Noam (like Noah, with an m :-).
I live in Israel. Love the VCG YouTube channel, your reviews and recommendations.
It we wonderful, if you can look/review amazon and other deals that ship internationally, for us oversea members.
And if possible, give us a heads-up on live streams. With the time diff. I really need to prep to get online at the right time – I’m on EST+7..)
Thanks!
Noam Seagull
Hi VCG
I’m intending to purchase a Milwaukee one key drill and driver twin kit. Can you please tell me if they have any current issues with these models. If so can you recommend me another brand or model as I am a home diy user and would like to buy a decent kit.
Thank you
AR
Hi Vince , Sorry to bother you on a business site as i watch regular youtube you do on tools ,I have a Skilsaw and I am in Australia , And its a 15 plus yr saw and I bought in AUS but mate don’t no were, works like a trooper but needs a update, Do you No people at SKIL that can answer me this question as there is no customer email available in AUS and in my USA search other than social media now ?
I like to buy a new one and a new battery Skilsaw wormdrive to Australian electrics as USA is different power, I have heard UK power tools are compatible to AUS not having a transformer converter. Can you ask when go to Trade show can I buy in AUs what Skil has in USA or the youtube members may no more ” I post in your youtube clips as tom Thumb ” and hope I get a answer , im so jealous you can get them as we seem to have but like a handyman version not like my old skilsaw. I like to know were I can buy and compatible to AUS without transformer or will and when they bring to AUS . PS love the youtube channel thumbs up
call this number maybe they can help you
CONTACT US
UNITED STATES AND CANADA
1-877-(754)-5999
Vince, I would like to thank you, after watching your videos and some others on line I have decided to go legit and become a licensed contractor. I have 20 plus years of experience as a “handy man” and would like to step up my game to bigger projects as a licensed contractor.
My question for you is in one of your videos it showed you racing across town to reinstall a fixture that fell off the front of a store. How do you get set up to do work at retail stores and or shopping centers? Hand out business cards?
Thanks for your time.
Yes, start by handing out cards and doing business with the bussiness you already patronize!
allo YVES , from other side of the border north . I try to get a t-shirt VCG but you’re web sites or check out are not designed cdn and province ,let me know any solution thanks merci 😋
yeah, I’m sorry, we only ship within the United States!
Hey Vince, have you ever thought about making Tally books to sell.in your merch store?
I used to work for McJunkin RedMan Corporation back in 2014-2017 and since then I haven’t been able to find any like them. If you do end up making some let me know so we can buy a couple off you, please?
Check Amazon
Hey VCG!!
I Reached out to Dewalt but I wanted to let you know case you find it interesting also. I’ve got the Dewalt tablesaw with the rolling stand and then I also have the Dewalt folding workbench. I was ripping plywood on it by myself and I use the folding workbench table to help make it easier & safer! However the folding workbench table is actually 6 inches lower than the actual tablesaw I figured it would be great if they both were at the same height!!! Maybe it’s just me but dewalt could come out with a new 2.0 folding work bench table that sat up a little bit higher. Any thoughts on this issue? Thanks for your time!!!
something that has adjustable legs would be ideal for what you need!
PH2 Bosch bits made in US is better and llast longer than who are made in PRC, this is the same with other brands. Please check it out.
Hi Vince, Enjoyed your video on the Ego brand tools. I have a ? I have been looking for a good pair of work boots. What are the ones you are wearing in the Ego site. They are tan with white bottoms, seems like rubber protection on the front toes and yellow shoestrings. They look to be comfortable athletic work boots. Are they Dewalt boots/because of the color of them? I am just a regular homeowner who likes your reviews on tools and your knowledge about them. Hope to hear from you. Thank you. Walter PS I looked at your work site. Looks like you do great work.
They’re Nike Duck Boots, I’d only recommend them for lite jobsite work!
This is a Milwaukee Tool question, my apologies if I am at the wrong location for my question as this is your Construction Co, website.
Why doesn’t Milwaukee make a cordless crimp tool for Pex Pinch clamps? They make cordless tools for the other two types of Pex termination. I can not get an answer from Milwaukee. Sure wish they would make this tool. Thanks.
Love your reviews they have been very helpful.
I found a better deal on the m12 radio charger from grainger.com 119.00 Plus free 2.0 cp battery.
Batteries are important to me so I’d rather pay regular price to get a battery than get 20.00 off and not get a battery
Hey Vince! Homedepot is running a nice little deal right now with the M18 Orbital Sander. You buy it $119.00, they throw in a Red Lithium cp 2.0 battery! I had just purchased my orbital 10 days ago, I’m going back to return it now and repurchase it! Have a great weekend, love the channel!
All the best,
Rodolfo
How can I send you a picture (snapshot) I took from a recent DeWalt email I received? It was to promote the new 12v Xtreme circular saw. On the side it shows other 12v line tools Ive never seen for the Xtreme line. Wondering if you guys can get any info from DeWalt. It shows a multi-tool and what seems like different attachments for an installation tool like other brands have made. Unless you get the same emails take a closer look at the picture that has the saw on the left and other 12v tools towards the right.
Hi Vince,
I often watch many of your videos and you always show awesome deals at HomeDepot, but I’m from South Philly and neither the Oregon or Delaware Ave stores come close to the tool displays you show on your Youtube Channel. Which Depot do you shoot your videos from? I hope you can answer.
V/R
Rick
Go over to Deptford or Cherry Hill.
Thanks Cuz!!!
Good Morning,
I would like to receive more information on your testing services regarding deep impact sockets for Metric and SAE?
Please let us know:
*Pricing
*L/T for completion
*Test parameters and how results are compared to the Market….. compared to such brands like Dewalt, Gear Wrench, etc?
*All other info included in your services for this product testing and next steps.
We have the sockets inhouse we can send upon request.
Please first email me the above breakdown.
I look forward in hearing from you.
Thanks
Robert Farrell
Hi VCG,
I just got the Flex Stack Pack rolling base bottom which was originally $139, now on clearance for $22.98. That is insane. This was at the Lowe’s in Matamoras, PA.
All the best,
Steven